Influence of the zone of weakness on dip angle and shear heating of subducted slabs     

Martin Kuka?ka  Ctirad Matyska 《Physics of the Earth and Planetary Interiors》2004,141(4):243-252

We study the importance of the zones of weakness and the pattern of downgoing flow in steady-state models of subducting lithosphere, which interacts mechanically and thermally with the ambient mantle. The non-linear system of governing equations consists of (i) the momentum equation in stream function formulation and (ii) the steady-state heat transfer equation including conduction and advection of heat and dissipation. A finite element method has been applied to this system. We consider the viscosity to be a non-linear function of both the temperature and the stream function. In steady-state two-dimensional (2D) flow, the stream function isolines follow material trajectories. They are used to follow the top of the subducting slab, which because of its possible increase in water content, is assumed to have a lower viscosity. The zone of weakness has been thus obtained in the self-consistent fashion since the stream function as well as the temperature are the output from our modeling and no a priori assumptions about the shape of the bending lithosphere are taken into account. It was shown that several orders decrease of viscosity in the zone of weakness is required to obtain the dip angle of about 45°. If the decrease of viscosity is not sufficient enough, the subducted slab either sinks almost vertically or does not exhibit a plate-like behavior. We have also demonstrated that shear heating can unrealistically increase at the zone of weakness for fast subductions if decrease of viscosity is underestimated.  相似文献   

A Modeling Study of the Effects of Anomalous Snow Cover over the Tibetan Plateau upon the South Asian Summer Monsoon   总被引：1，自引：0，他引：1  

刘华强  孙照渤王举 闵锦忠 《大气科学进展》2004,21(6):964-975

The effect of anomalous snow cover over the Tibetan Plateau upon the South Asian summer monsoon is investigated by numerical simulations using the NCAR regional climate model (RegCM2) into which gravity wave drag has been introduced. The simulations adopt relatively realistic snow mass forcings based on Scanning Multi-channel Microwave Radiometer (SNINIR) pentad snow depth data. The physical mechanism and spatial structure of the sensitivity of the South Asian early summer monsoon to snow cover anomaly over the Tibetan Plateau are revealed. The main results are summarized as follows. The heavier than normal snow cover over the Plateau can obviously reduce the shortwave radiation absorbed by surface through the albedo effect, which is compensated by weaker upward sensible heat flux associated with colder surface temperature, whereas the effects of snow melting and evaporation are relatively smaller.The anomalies of surface heat fluxes can last until June and become unobvious in July. The decrease of the Plateau surface temperature caused by heavier snow cover reaches its maximum value from late April to early May. The atmospheric cooling in the mid-upper troposphere over the Plateau and its surrounding areas is most obvious in May and can keep a fairly strong intensity in June. In contrast, there is warming to the south of the Plateau in the mid-lower troposphere from April to June with a maximum value in May.The heavier snow cover over the Plateau can reduce the intensity of the South Asian summer monsoon and rainfall to some extent, but this influence is only obvious in early summer and almost disappears in later stages.  相似文献   

High-pressure experimental growth of diamond using C–K₂CO₃–KCl as an analogue for Cl-bearing carbonate fluid     

Emma Tomlinson  Adrian Jones  Judith Milledge 《Lithos》2004,77(1-4):287-294

High-pressure, high-temperature diamond growth experiments have been conducted in the system C–K₂CO₃–KCl at 1050–1420 °C, 7.0–7.7 GPa. KCl is of interest because of the strong effect of halogens on the phase relations of carbonate-rich systems [Geophys. Res. Lett. 30 (2003) 1022] and because of the occurrence of KCl coexisting with alkali silicate–carbonate fluids in natural-coated diamond [Geochim. Cosmochim. Acta 64 (2000) 717]. We have used system C–K₂CO₃–KCl as an analogue for these mantle fluids in diamond growth experiments. The presence of KCl reduces the potassium carbonate liquidus to ≤1000 °C at 7.7 GPa, allowing it to act as a solvent catalyst for diamond growth at temperatures below the continental geotherm. This is a reduction on the minimum diamond growth temperature reported in the alkali-carbonate–C–O–H system [Lithos 60 (2002) 145]. Diamond growth using carbonate solvent catalysts is characterised by a relatively long induction period. However, the addition of KCl also reduced the period for diamond growth in carbonate to 5 min; no such induction period appears to be necessary. It is suggested that KCl destabilises carbonate, allowing greater solubility and diffusion of carbon.  相似文献   

Further examples of ventifacts and unusual patterned ground from the Falkland Islands, South Atlantic     

Peter Wilson  Emma J. Edwards 《Geografiska Annaler: Series A, Physical Geography》2004,86(1):107-115

Abstract Examples of ventifacts and forms of unusual patterned ground that differ in situation, characteristics and/or origin to types reported previously are described from the Falkland Islands, South Atlantic. The ventifacts, represented by clasts projecting from an eroding tillite shore platform, have been grooved by the passage of windblown sand. The patterned ground forms comprise stone polygons on clay loam regolith, stone polygons on peat, peat‐filled desiccation cracks on peat, and clusters of on‐edge clasts (stone packings) on a gravel beach. Aeolian transport of particles is considered responsible for the infill of the polygonal cracks. The clusters of on‐edge clasts are thought to have developed as a result of wave action, in particular backwash and/or undertow. Although these features occupy small surface areas they provide useful information about local geomorphic processes and testify to the marked diversity of such features in nature.  相似文献   

Discrete-element modelling of detachment folding     

Stuart Hardy  Emma Finch† 《Basin Research》2005,17(4):507-520

A two‐dimensional, discrete‐element modelling technique is used to investigate the initiation and growth of detachment folds in sedimentary rocks above a weak décollement level. The model depicts the sedimentary rocks as an assemblage of spheres that obey Newton's equations of motion and that interact with elastic forces under the influence of gravity. Faulting or fracturing between neighbouring elements is represented by a transition from repulsive–attractive forces to solely repulsive forces. The sedimentary sequence is mechanically heterogeneous, consisting of intercalated layers of markedly different strengths and thicknesses. The interlayering of weak and strong layers within the sedimentary rocks promotes the localization of flexural flow deformation within the weak layers. Even with simple displacement boundary conditions, and straightforward interlayering of weak and strong layers, the structural geometries that develop are complex, with a combination of box, lift‐off and disharmonic detachment fold styles forming above the décollement. In detail, it is found that the modelled folds grow by both limb rotation and limb lengthening. The combination of these two mechanisms results in uplift patterns above the folds that are difficult, or misleading, to interpret in terms of simple kinematic models. Comparison of modelling results with natural examples and with kinematic models highlights the complexities of structural interpretation in such settings.  相似文献   

Tetrahedral Plots of the Phase Relations for Basalts     

Sven Maal?e  Richard N. Abbott Jr. 《Mathematical Geology》2005,37(8):869-893

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.  相似文献   

Trace element compositions of submicroscopic inclusions in coated diamond: A tool for understanding diamond petrogenesis     

Emma Tomlinson  Isabel De Schrijver  Adrian P. Jones  Frank Vanhaecke 《Geochimica et cosmochimica acta》2005,69(19):4719-4732

Trace element compositions of submicroscopic inclusions in both the core and the coat of five coated diamonds from the Democratic Republic of Congo (DRC, formerly Zaire) have been analyzed by Laser Ablation Inductively Coupled Mass Plasma Spectrometry (LA-ICP-MS). Both the diamond core and coat inclusions show a general 2-4-fold enrichment in incompatible elements relative to major elements. This level of enrichment is unlikely to be explained by the entrapment of silicate mantle minerals (olivine, garnet, clinopyroxene, phlogopite) alone and thus submicroscopic fluid or glass inclusions are inferred in both the diamond coat and in the gem quality diamond core. The diamond core fluids have elevated High Field Strength Element (Ti, Ta, Zr, Nb) concentrations and are enriched in U relative to inclusions in the diamond coats and relative to chondrite. The core fluids are also moderately enriched in LILE (Ba, Sr, K). Therefore, we suggest that the diamond cores contain inclusions of silicate melt. However, the Ni content and Ni/Fe ratio of the trapped fluid are very high for a silicate melt in equilibrium with mantle minerals; high Ni and Co concentrations in the diamond cores are attributed to the presence of a sulfide phase coexisting with silicate melt in the diamond core inclusions. Inclusions in the diamond coat are enriched in LILE (U, Ba, Sr, K) and La over the diamond core fluids and to chondrite. The coats have incompatible element ratios similar to natural carbonatite (coat fluid: Na/Ba ≈0.66, La/Ta≈130). The coat fluid is also moderately enriched in HFSE (Ta, Nb, Zr) when normalized to chondritic Al. LILE and La enrichment is related to the presence of a carbonatitic fluid in the diamond coat inclusions, which is mixed with a HFSE-rich hydrous silicate fluid similar to that in the core. The composition of the coat fluid is consistent with a genetic link to group 1 kimberlite.  相似文献   

Clam community composition and prey shell size impacts moon snail (Gastropod: Naticidae) drilling frequencies in South Carolina,USA     

Dimitar B. Zlatev  Michael C. Lordon  Emma A. Schremp  Andrew C. Steffen  Allison E. Grecco  Jason S. Bystriansky  Jalene M. LaMontagne 《Marine Ecology》2019,40(3)

Moon snail predation on clams is a common model system of predator–prey interactions. In this system, the predator bores through the shell of its prey, leaving a distinct and identifiable hole. Some paleoecological and behavioral research on moon snails suggests a trend in predation preference directed toward clams with small shells. Rarely, however, have studies tested relative drilling frequencies across species and size ranges in natural assemblages of clam communities. We examined the clam community composition at two beaches in South Carolina, USA, and we then tested moon snail predator preferences for (a) clam prey species and (b) whether their selection is related to prey shell size. We collected a total of 1,879 clam shells, identified each shell to species and recorded their anteroposterior length. The species composition of clams differed significantly between the two beaches; Anadara ovalis was dominant at both sites, but three of ten total species were only collected at one beach. Folly Beach had nearly a 60% higher the overall drilling frequency (34.6%) versus Edisto Beach (21.8%), and this may be linked to the differences in clam community compositions at the sites. For A. ovalis and Mulinia lateralis, shells with larger lengths have lower probabilities of being bored by a moon snail. Anadara brasiliana, which generally is a thinner‐shelled clam species, had the highest total drilling frequency (77.2%), and Noetia ponderosa, a thicker‐shelled clam, had a considerably lower drilling frequency (12.0%). We conclude that both community level factors (species composition) and population characteristics (shell size distributions) may influence the local drilling frequency by moon snails.  相似文献   

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data     

Xavier?LurtonEmail authorView author&#;s OrcID profile  Dimitrios?Eleftherakis  Jean-Marie?Augustin 《Marine Geophysical Researches》2018,39(1-2):183-203

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.  相似文献   

Characterization of Frequency and Aggregation of the Antarctic Krill (<Emphasis Type="Italic">Euphausia superba</Emphasis>) Using Acoustics     

Seok-Gwan?Choi  Eun-A?Yoon  Doo-Hae?An  Sangdeuk?Chung  Jaebong?Lee  Kyounghoon?LeeEmail author 《Ocean Science Journal》2018,53(4):667-677

In this study, the dB difference and characteristics of krill swarms inhabiting Subarea 48.1, which includes the west and south of the South Shetland Island and the Elephant Island peripheries, were estimated to distinguish Antarctic krill, using acoustics. From April 13 to 24, 2016, acoustic data were collected along 24 survey lines using the frequencies 38 and 120 kHz, and middle trawling was performed at 7 stations. Using the difference between the dB values of two volume backscattering strength (Sv) frequencies (38 and 120 kHz), a clear acoustic distinction could be made between Antarctic krill (4.9 to 12.0 dB) and fish (?4.0 to ?0.2 dB). The distributions and mean Sv of krill swarms in the Elephant Island peripheries and south of South Shetland Island were higher than those in the west of South Shetland Island. The mean length/ height ratio of krill swarms in the west of the South Shetland Island (64.5) was higher than that in the south (35.9) and the Elephant Island peripheries (33.8), with the length of the aggregations exceeding their height. Most krill swarms were distributed between the surface layer (less than 10 m below sea level) and within 200 m of water depth. These results are expected to serve as baseline data for evaluating krill density and biomass by distinguishing them from fish, using acoustics.  相似文献